Ok I update from sourceforge the chan-capi-cm 0.6.4 with the good
capi.conf and now it's working fine.
I still not know why the old one (package from debian) are not working
with the old capi.conf ?
Thanks for your help ,
Cédric
Armin Schindler a écrit :
What version of chan_capi do you use? Your capi.conf is for an old
chan_capi. If you use an old version, please update to chan_capi
from sourceforge.net and adapt your capi.conf.
Armin
On Tue, 21 Feb 2006, cédric Buzay wrote:
Hi everybody.
I'm trying to setting up a V4 BRI EICON card on ASTERISK 1.0.7
My linux is a debian.
It was working during a few days an suddenly (after a lot of reboot)
I've got this error message that seems to be very popular but I couldn't
find any
answer on the net :
==============================================.
Asterisk Dynamic Loader Starting:
== Parsing '/etc/asterisk/modules.conf': Found
[chan_capi.so] => (Common ISDN API for Asterisk)
== Parsing '/etc/asterisk/capi.conf': Found
Feb 21 03:08:34 NOTICE[10319]: chan_capi.c:2645 load_module: unable to
listen!
Feb 21 03:08:34 WARNING[10319]: loader.c:345 ast_load_resource:
chan_capi.so: load_module failed, returning -1
== Unregistered channel type 'CAPI'
Feb 21 03:08:34 WARNING[10319]: loader.c:391 load_modules: Loading
module chan_capi.so failed!
===============================================
I've got all the persmissions on the .conf files and on the /dev/capi20
my drivers are those :
dmesg | grep -i capi
Eicon DIVA - CAPI Interface driver (http://www.melware.net)
divacapi: Rel:2.0 Rev:1.24 Build: 105-75(local)
divacapi: module unloaded.
Eicon DIVA - CAPI Interface driver (http://www.melware.net)
divacapi: Rel:2.0 Rev:1.24 Build: 105-75(local)
and they work at a CAPI level :
Update CFGLib information ... succeeded
Start adapter Nr:1 - 'Diva Server V-4BRI-8', SN: 23208 ... OK (already
active)
Successfully updated configuration of Diva Server V-4BRI-8 PORT: 0 SN:
Successfully updated configuration of Diva Server V-4BRI-8 PORT: 1 SN:
Successfully updated configuration of Diva Server V-4BRI-8 PORT: 2 SN:
Successfully updated configuration of Diva Server V-4BRI-8 PORT: 3 SN:
Successfully updated configuration of Diva TTY driver
Successfully updated configuration of Diva MTPX driver
Successfully updated configuration of Diva CAPI driver
My modules.conf seems correct:
=================================================
[....]
noload => app_intercom.so
;
; Explicitly load the chan_modem.so early on to be sure
; it loads before any of the chan_modem_* 's afte rit
;
; load => chan_modem.so
; load => res_musiconhold.so
load => chan_capi.so
;
; Load either OSS or ALSA, not both
; By default, load OSS only (automatically) and do not load ALSA
;
noload => chan_alsa.so
noload => chan_oss.so
;
; Module names listed in "global" section will have symbols globally
; exported to modules loaded after them.
;
[global]
;chan_modem.so=yes
chan_capi.so=yes
And my capi.conf also :
;
; CAPI config
;
;
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
[interfaces]
msn=0MYNUMBER0
incomingmsn=*
controller=1
; softdtmf=1
; accountcode=
context=demo
;echosquelch=1
echocancel=yes
; echotail=64
; callgroup=1
; deflect=12345678
devices=2
=================================================
Any ideas ???
Thanks
Cédric
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
