At 07:24 AM 02/21/2006, you wrote:
* Using Flash() in dialplan - doesn't work since channel is
Dial()-ed and doesn't allow applications at that very moment
* Typing *0 on phone => zap channel doc says this should send flash,
but doesn't seem to work in bridged scenarios (ZAP=>*=>ZAP or SIP=>*=>ZAP)
* Typing # on phone => as of documentation, this sometimes emulates
flash => not in my setup
* Tried the above from snom sip phone, sip ata with analogue phone
and flash-key, mobile phone called in via another zap channel => no
difference between the incomings
Transfer to this extension works. This example flashes and then calls
back 1XX if you send it to 6XX.
exten => _6[0-2][0-4],1,Flash()
exten => _6[0-2][0-4],2,Dial(SIP/1${EXTEN:1},,rtT)
OR you can try this:
in features.conf:
[applicationmap]
zapflash=>*3,callee,flash
if you put any spaces in the above line, it will not work!!!
in extensions.conf add this line right before the dial commands where
you want this to work:
exten => s,12, set(DYNAMIC_FEATURES=zapflash)
Then *3 should flash the line.
Ira
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.375 / Virus Database: 267.15.12/265 - Release Date: 02/20/2006
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
