I just moved the card to another slot, and I now seem to have voice! Upon removing one of the cards, I noticed a resistor is broken off at the base. Not sure if it was always like that or if I did it removing it, but I now do seem to be further along.
Still seems to be trouble detecting that the remote caller has hung up though. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul J. Smith Sent: 23 February 2006 17:18 To: [email protected] Subject: [Asterisk-Users] UK X100P installation help Hi, I've got the latest [EMAIL PROTECTED] setup running with SIP. I've been trying to tie it in with the PSTN off and on for a while with no success. I gave up on ISDN and purchased 2 x100p cards from x100p.com. I've got the card installed, the machine can see it. The problems I have at the moment are First time I start up the drivers and asterisk, I can call the pstn number. The call is detected, the SIP phone rings, you can pick up the call, but there is nothing but a faint noise. After that, if you try to call the number again, it's engaged, as if the x100 P has not dropped the line, though watching the asterisk log in real time it says it has. I've looked all over the web for some detailed instructions, but most just mirror what I've already done. Is it because I'm in the UK? I could not find anyone using these in the UK. Maybe they don't like UK phone sockets? My zaptel.conf is # Span 1: WCFXO/0 "Wildcard X100P Board 1" fxsks=1 # Global data loadzone = uk defaultzone = uk Can anyone help me to get this working? Thanks. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
