On Feb 23, 2006, at 10.43, btb wrote:
Johnathan Corgan wrote:
btb wrote:
[7508] ;ipkall
type = peer
dtmfmode = rfc2833
context = remote
callerid = "ipkall incoming" <7508>
nat = no
You've configured this entry as a peer, which is for dialing out,
versus
as a user, which is for incoming calls. Solution is to change to
'type=user'.
If you really need a peer definition, you can use 'type=friend',
which
will cause * to create both a user and a peer entry for '7508'
using the
parameters listed. Some parameters are common to both peers and
users
so it saves space.
Personally, I never use the 'type=friend' method, but rather maintain
separate peer and user sections for outbound and inbound calls to/
from
other switches or endpoints. This helps _me_ keep things straight;
others (probably most) prefer the combined 'type=friend' method,
though.
thanks jonathan-
i originally had this entry as type=user, and switched to type=peer
after finding the context was being ignored and reading that
type=user may/is be(ing) phased out:
http://www.voip-info.org/wiki/view/Asterisk+SIP+user+vs+peer
i've tried type=user again (as well as type=peer), with some
additional parameters (mostly guesses, because i don't yet fully
understand registration):
[7508] ;ipkall
type = peer
host = dynamic
dtmfmode = rfc2833
context = remote
callerid = "ipkall incoming" <7508>
nat = no
insecure = very
i gather the ideal method is to know the source ip and source port
of the connection from my peer, and include that in the sip
config? how can i make asterisk tell me where a connection is
coming from?
so, in answer to my own question, this ended up being what i needed
in sip.conf:
[ipkall]
type = peer
host = voiper.ipkall.com
dtmfmode = rfc2833
context = remote
callerid = "ipkall incoming"
nat = no
the key was the host parameter. as soon as i added that, matching
occurred and the context was honored.
thanks
-ben
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
