I am using asterisk CVS 10842 and a TDM 400p withanfxs and an fxo
module and when I dial the fxs channel it rings for a second and then
says no answer after 20 seconds. I also have the latest Zaptel drivers.
Here is a log snippet.
Feb 25 00:53:11 VERBOSE[2015] logger.c: -- Executing
Dial("SIP/15712523171-09c1", "ZAP/1|20|trwW") in new stack
Feb 25 00:53:11 VERBOSE[2015] logger.c: -- Called 1
Feb 25 00:53:11 DEBUG[2015] channel.c: Driver for channel
'SIP/15712523171-09c1' does not support indication 3, emulating it
Feb 25 00:53:11 DEBUG[2015] channel.c: Scheduling timer at 160 sample
intervals
Feb 25 00:53:11 VERBOSE[2015] logger.c: -- Zap/1-1 is ringing
Feb 25 00:53:11 DEBUG[2015] channel.c: Generator got voice, switching
to phase locked mode
Feb 25 00:53:11 DEBUG[2015] channel.c: Scheduling timer at 0 sample
intervals
Feb 25 00:53:11 VERBOSE[2015] logger.c: -- Nobody picked up in
20000 ms
Any assistance would be appreciated.
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici
[EMAIL PROTECTED]
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
