> I'd like to use the AGI command "CHANNEL STATUS" to check the status of a > channel. However, the dial() command doesn't return -1 until after the > call has hung up. If that's the case, how is channel status supposed to > return statuses like: > > <status> values: > 0 Channel is down and available > 1 Channel is down, but reserved > 2 Channel is off hook > 3 Digits (or equivalent) have been dialed > 4 Line is ringing > 5 Remote end is ringing > 6 Line is up > 7 Line is busy > > If dial() doesn't return -1 until after the call is complete, it doesn't > seem possible to me that you can check '4 Line is ringing' for example. > > Doug
Doug, I get the distinct impression that CHANNEL STATUS is to be used independently of the dial() app. At least that's what I see when I read up on AGI, CHANNEL STATUS and dial(). Can you post a snip of the dialplan you've got? I'd like to tinker around with it. Thanks, MC _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users