On Tue, Feb 28, 2006 at 09:20:05AM +0100, Armin Schindler wrote: > > OK, I've reported a bug to mISDN. With the patch from the Karsten Keil > > in the mantis tracker: > > issue: https://www.isdn4linux.de/mantis/view.php?id=40 > > I'm now gettig connect_ind and info_ind in the correct order (asterisk > > capi debug + verbose 15 log attached). The call still does not proceed > > in asterisk (the disconnect comes whe I unplug the ISDN-Line after > > several minutes). I've also attached my capi.conf and relevant portions > > of the dialplan. The version of mISDN is mqueue from yesterday with the > > mantis-tracker patch applied. > > > > Any ideas what I should try next? > > Well, the error message from mISDN: > > CAPI INFO 0x3301: Protocol error layer 1 (broken line or B-channel > removed by signalling protocol) > > seems to be very clear. The ISDN line is not working or the used protocol is > wrong.
This error message occurs when I unplug the ISDN-Line from my testing machine LOOOONG after the call already timed out on the remote end (I'm getting "No answer"). So the call is seen by asterisk, the info_ind is seen by asterisk, but then nothing else happens. What does chan_capi wait for after the connect? Ralf -- Ralf Schlatterbeck email: [EMAIL PROTECTED] FAX: +43/2243/26465/23 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
