a better way is to to load the driver with all spans set to E1 by running
modprobe wcte11xp t1e1override=15
or edit wcte11xp.c and change 'static int t1e1override = -1;' to 'static int
t1e1override = 15;'
Diyanat
From: Robert Andersson <[EMAIL PROTECTED]>
Reply-To: Asterisk Users Mailing List - Non-Commercial
Discussion<[email protected]>
To: [email protected]
Subject: [Asterisk-Users] run with incorrect E1/T1 jumper settings
Date: Tue, 28 Feb 2006 10:36:57 +0100
Precedence: list
Hi,
I have installed an TE110P but forgot to change the jumper
settings to E1. I don't have easy physical access to ther server
at the moment so I wonder if it will be possible to run it without changing
the jumper settings with a configuration like below or will it be
impossible
to use the card at all before I fix the jumper? I can't try it myself yet
since the operator isn't ready yet, but I would like to know in advance
if it is impossible.
bchan=1-15,17-24
dchan=16
instead of
bchan=1-15,17-31
dchan=16
best regards
Robert
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
