|
Hi, I have just joined this mail list yesterday and have
been searching the Asterisk wiki prior to posting this question. Unfortunately I am not sure if I am searching at the
correct places, so I do apologise if this has been posted before. I have currently been tasked to roll out VoIP phones
through out our office as the current proprietary Panasonic PBX has no more
channels. Thus I have installed [EMAIL PROTECTED] on VIA
SP13000,512Mb Ram and using 2 x Digum TDM400P cards with both having 4x TDM40B
FXO modules. I have rolled out 12 x Snom320 phones & 1 x
Snom360 in the office. For the test phase, I wanted to use the current PBX, Therefore
Port 1 of the TDM is currently connected to one of the POTS extensions which is
spare on the current PBX. Current problems I am facing in the test phase: Whenever I call from outside e.g. from the fax line
(separate line) or my mobile, to the main number setup on the Trunk, I get a
delay of around 12sec before the VoIP phone actually rings, although the phones
connected to the current PBX, ring immediately. I have attached the output file and noticed that the
DBget is trying to find ‘something’ in the AstDB, would that be
causing the delay? Or am I looking at the wrong place altogether. Please Help Regards Ash Thakrar |
asterisk1*CLI> soft hangup Zap/1-1
Requested Hangup on channel 'Zap/1-1'
== Spawn extension (macro-exten-vm, s-BUSY, 2) exited non-zero on 'Zap/1-1'
in macro 'exten-vm'
== Spawn extension (ext-local, 220, 1) exited non-zero on 'Zap/1-1'
-- Hungup 'Zap/1-1'
-- Starting simple switch on 'Zap/1-1'
-- Executing GotoIf("Zap/1-1", "1?from-pstn-reghours|s|1:") in new stack
-- Goto (from-pstn-reghours,s,1)
-- Executing GotoIf("Zap/1-1", "0?from-pstn-reghours-nofax|s|1:2") in new
stack
-- Goto (from-pstn-reghours,s,2)
-- Executing Answer("Zap/1-1", "") in new stack
-- Executing Wait("Zap/1-1", "1") in new stack
-- Executing SetVar("Zap/1-1", "intype=EXT-220") in new stack
-- Executing Cut("Zap/1-1", "intype=intype|-|1") in new stack
-- Executing GotoIf("Zap/1-1", "1?7:9") in new stack
-- Goto (from-pstn-reghours,s,7)
-- Executing Wait("Zap/1-1", "3") in new stack
-- Executing Goto("Zap/1-1", "ext-local|220|1") in new stack
-- Goto (ext-local,220,1)
-- Executing Macro("Zap/1-1", "exten-vm|novm|220") in new stack
-- Executing Macro("Zap/1-1", "user-callerid") in new stack
-- Executing DBget("Zap/1-1", "AMPUSER=DEVICE//user") in new stack
-- DBget: varname=AMPUSER, family=DEVICE, key=/user
-- DBget: Value not found in database.
-- Executing DBget("Zap/1-1", "AMPUSERCIDNAME=AMPUSER//cidname") in new
stack
-- DBget: varname=AMPUSERCIDNAME, family=AMPUSER, key=/cidname
-- DBget: Value not found in database.
-- Executing GotoIf("Zap/1-1", "1?5") in new stack
-- Goto (macro-user-callerid,s,5)
-- Executing NoOp("Zap/1-1", "Using CallerID ") in new stack
-- Executing SetVar("Zap/1-1", "FROMCONTEXT=exten-vm") in new stack
-- Executing Macro("Zap/1-1", "record-enable|220|IN") in new stack
-- Executing GotoIf("Zap/1-1", "0 > 0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing AGI("Zap/1-1", "recordingcheck|20060227-131600|1141046151.2")
in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20060227-131600|1141046151.2: Inbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing NoOp("Zap/1-1", "No recording needed") in new stack
-- Executing Macro("Zap/1-1", "dial|15|tr|220") in new stack
-- Executing GotoIf("Zap/1-1", "0?4:2") in new stack
-- Goto (macro-dial,s,2)
-- Executing GotoIf("Zap/1-1", "0?5:4") in new stack
-- Goto (macro-dial,s,4)
-- Executing AGI("Zap/1-1", "dialparties.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
-- dialparties.agi: priority = 4
-- dialparties.agi: callingani2 = 0
-- dialparties.agi: accountcode =
-- dialparties.agi: channel = Zap/1-1
-- dialparties.agi: callerid = unknown
-- dialparties.agi: context = macro-dial
-- dialparties.agi: callington = 0
-- dialparties.agi: dnid = unknown
-- dialparties.agi: request = dialparties.agi
-- dialparties.agi: calleridname = unknown
-- dialparties.agi: extension = s
-- dialparties.agi: language = en
-- dialparties.agi: uniqueid = 1141046151.2
-- dialparties.agi: callingpres = 0
-- dialparties.agi: type = Zap
-- dialparties.agi: rdnis = unknown
-- dialparties.agi: callingtns = 0
-- dialparties.agi: enhanced = 0.0
dialparties.agi: Caller ID is not set
dialparties.agi: Methodology of ring is 'none'
-- dialparties.agi: Added extension 220 to extension map
-- dialparties.agi: Extension 220 cf is disabled
-- dialparties.agi: Extension 220 do not disturb is disabled
-- dialparties.agi: Checking CW and CFB status for extension 220
== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'admin' logged on from 127.0.0.1
-- dialparties.agi: Correct AMPMGRUSER and AMPMGRPASS
== Manager 'admin' logged off from 127.0.0.1
dialparties.agi: Extension 220 is available...skipping checks
-- dialparties.agi: DbDel CALLTRACE/220 - Caller ID is not defined
-- AGI Script dialparties.agi completed, returning 0
-- Executing Dial("Zap/1-1", "SIP/220|15|tr") in new stack
-- Called 220
-- SIP/220-1f31 is ringing
-- SIP/220-1f31 is ringing
-- SIP/220-1f31 is ringing
-- SIP/220-1f31 is ringing
-- SIP/220-1f31 is ringing
-- SIP/220-1f31 is ringing
-- Nobody picked up in 15000 ms
-- Executing GotoIf("Zap/1-1", "0?s-NOANSWER|1") in new stack
-- Executing GotoIf("Zap/1-1", "1?s-NOANSWER|1") in new stack
-- Goto (macro-exten-vm,s-NOANSWER,1)
-- Executing Congestion("Zap/1-1", "") in new stack
asterisk1*CLI> soft hangup Zap/1-1
Requested Hangup on channel 'Zap/1-1'
== Spawn extension (macro-exten-vm, s-NOANSWER, 1) exited non-zero on
'Zap/1-1' in macro 'exten-vm'
== Spawn extension (ext-local, 220, 1) exited non-zero on 'Zap/1-1'
-- Hungup 'Zap/1-1'
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
