|
Hi,
I’m trying to connect * to Nortel BCM 50, This PBX use H.323 v3 to interface with other PBX. The port use to connect is TCP 1720 but I can’t configure this port on my * box. I’m using a H.323.conf file sample to activate the port but the * isn’t listening there. Somebody have any idea or tip?
This is mi H.323.conf
[general] port = 1720 bindaddr = 192.168.0.200 ;tos=lowdelay ;
; amaflags = default ;
; ;accountcode=lss0101 ;
; allow=all ; turns on all installed codecs ;disallow=g723.1 ; Hm... Proprietary, don't use it... ;allow=gsm ; Always allow GSM, it's cool :) ;allow=ulaw ; User-Input Mode ( DTMF ) ; ; valid entries are: rfc2833, inband ; default is rfc2833 dtmfmode=rfc2833 ; ; Set the gatekeeper ; DISCOVER - Find the Gk address using multicast ; DISABLE - Disable the use of a GK ; <IP address> or <Host name> - The acutal IP address or hostname of your GK ;gatekeeper = DISABLE ;
Tell Asterisk whether or not to accept Gatekeeper routed calls or not. Normally this should always be set to yes, unless you want to have finer control over wh ch users are allowed access to Asterisk. Default: YES
; AllowGKRouted = yes ;
Default context gets used in siutations where you are using the GK routed model or no type=user was found. This gives you the ability to either play an invalid message or to simply not use user authentication at all.
Thanks in advance.
Pedro.
|
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
