I'll guess the TE410P is being loaded first - Try swapping entries in
zaptel.conf and zapata.conf
Bart
----- Original Message -----
From: "Bartosz Supczinski" <[EMAIL PROTECTED]>
To: "Asterisk-Users" <asterisk-users@lists.digium.com>; "Asterisk-Dev"
<asterisk-dev@lists.digium.com>
Sent: Tuesday, February 28, 2006 6:57 PM
Subject: [Asterisk-Users] Problem with two cards Digium
Hello,
I`ve got a problem which I can`t deal with. I own 2 cards - TDM2400P and
TE410P. I`ve put them into a HP Proliant DL380 G4 server, compiled the
drivers according to the manual. Unfortunetly there are both cards
channels are configured in zaptel.conf file the first module (in this
file) sends an error.
For configuration:
span = 1, 1, 0, ccs, hdb3, crc4
fxsks = 21-24
bchan = 25-39, 41-55
dchan = 40
root# modprobe zaptel
root# modprobe wctdm24xxp
------------------------------
ZT_CHANCONFIG failed on channel 25: No such device or address (6) FATAL:
Error running install command for wctdm24xxp
For configuration:
span = 1, 1, 0, ccs, hdb3, crc4
bchan = 1-15, 17-31
dchan = 16
fxsks = 145-148
root# modprobe zaptel
root# modprobe wct4xxp
----------------------
ZT_CHANCONFIG failed on channel 145: No such device or address (6) FATAL:
Error running install command for wct4xxp
If the configuration applies only a single card the modules are loaded
correctly. The analog card is equiped with one FXO module, which is placed
in the last joint. I`ve disabled hyperthreading in my kernel and in BIOS,
interrupts are not shared. Besides I`ve put the cards in other slots,
switched on and off ACPI and other functions in BIOS as well as in my
kernel. Maybe the problem is in the drivers?
I`ve attached some information which might be useful.
http://www.dir.pl/~supczinskib/logs.tgz
--
With best regards
Bartosz Supczinski
IT Manager
DIR
Konstytucji 3 Maja 2
86-300 Grudziadz
POLAND
www.dir.pl
t.: +48 (56) 6440100
f.: +48 (56) 6440111
m.: +48 (504) 019040
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
