On Mar 7, 2006, at 7:02 AM, artifex maximus wrote:

Hi all!

I have the following setup:
Phone lines -> traditional PBX -> Welltech 3802
-> VPN ->
Asterisk -> Linksys PAP2/Welltech ATA-151 -> phone

There is 2 pieces of Welltech 3802 (2 port FXO) connected to 4 (2x2)
PBX extensions. Asterisk is a proxy here. Each device successfully
register itself. I tried the setup above with Linksys and Welltech
devices as well.

I setup Asterisk as a local PBX and phones can call each others on
Asterisk side and possible transfering calls. I setup Welltech 3802
with hotline mode so if someone call the public number from outside
the call transferred through VPN and phone rings in front of me.
Great. It's still possible transfer call within Asterisk side.
Excellent.

The problem comes when I want to call extension on PBX side or
transfer incoming call to the PBX side. I got the line sound when I
press flash, the caller hear the MOH and when I call extensions on PBX
side I got only busy tone.
If I am not mistaken, then I think your question is regarding the flash event on the welltech hardware and getting that to work correctly for switching in a "call waiting" situation? Although your setup is MUCH more complex then mine, I have this problem with the welltech 3701a as well.

How could I tell that Asterisk send back the flash&DTMF on the same
PBX extension where call comes from? I think this is important for PBX
to connect lines "inside" right. How could I route outcoming calls on
a port of Welltech 3802?
The outgoing calls on the welltech (at least for the SIP setup) are routed via the welltechs setup screens which include a totally cryptic "routing setup" or some such. Try searching this list for the last couple of days for "welltech" I think someone explained this nicely.
<snip>
Sorry I am not helpful on this, but looking for a similar answer?

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to