Re: [Asterisk-Users] OT: Snom 320, displaying text on the screenfrom *

[Franklin Webb]

----- Original Message -----

From: Sean Kennedy

To: Asterisk Users Mailing List - Non-Commercial Discussion

Sent: Thursday, March 09, 2006 7:00 PM

Subject: Re: [Asterisk-Users] OT: Snom 320, displaying text on the screenfrom *

I have that set, but for some reason I get errors when I try sipsak, and nothing comes through to the phone:

sipsak -M -B "test" -s sip:[EMAIL PROTECTED]
timeout after 500ms
timeout after 500ms...

Some debugging info:

[EMAIL PROTECTED] root]# sipsak -vvv -M -B "test" -s sip:[EMAIL PROTECTED]
warning: ignoring -i option when in usrloc mode
fqdnhostname: 192.168.1.1
our Via-Line: Via: SIP/2.0/UDP 192.168.1.1:34213;branch=z9hG4bK.105fb86e;rport;alias

New message with Via-Line:
MESSAGE sip:[EMAIL PROTECTED] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.1:34213;branch=z9hG4bK.105fb86e;rport;alias
To: sip:[EMAIL PROTECTED]
Call-ID: [EMAIL PROTECTED]
CSeq: 1 MESSAGE
Content-Type: text/plain
Max-Forwards: 70
User-Agent: sipsak 0.9.5
From: sip:[EMAIL PROTECTED]:34213;tag=7c8bd47f
Content-Length: 4

test
sending message ...

request:
MESSAGE sip:[EMAIL PROTECTED] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.1:34213;branch=z9hG4bK.105fb86e;rport;alias
To: sip:[EMAIL PROTECTED]
Call-ID: [EMAIL PROTECTED]
CSeq: 1 MESSAGE
Content-Type: text/plain
Max-Forwards: 70
User-Agent: sipsak 0.9.5
From: sip:[EMAIL PROTECTED]:34213;tag=7c8bd47f
Content-Length: 4

test
send to: UDP:192.168.1.67:5060
:
ignoring MESSAGE retransmission
timeout after 500 ms

So I am at a bit of a loss.

Thanks for your help though, I apprecaite it.  :)

Colin Anderson wrote:

Trick with Sipsak is you have to change the network port to 5060 or sipsak
messages never hit the right port. In the web interface, Advaced > Avanced
Network > Network identity (port): change that to 5060 and you should be
good assuming you can figure out sipsak's nasty syntax. hth.

---

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Sean,     I can concur as far as the comments here regarding the sipsak syntax.  We use sipsak to update the display on our phones so our agents know if they are logged in or logged out.   The sipsak syntax we use with good results is:   sipsak -M -O deasktop -B "(your message)" -r 5060 -s sip:(phone exten)@(phone IP)   5060 is the port we use.  In the Snom setup I set the port for each phone to 5060 under the "Advanced" section by putting 5060 in "

Network identity (port):"   It definitely took me a while to get sipsak working properly, but the good news is once you get it working it is reliable.   -Frank Webb Inter Media Marketing Solutions

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users