Thre more bits of info --
1) I have an identical Digium card. I tried swapping out the FXS module
with the one in this system, and I tried switching cards -- but to no
avail. So it's likely to be a system or configuration problem.
2) The system is an xPC running Fedora core 4 SMP:
2.6.15-1.1831_FC4smp
3) Asterisk and the other modules where all checked out a few days ago using
cvs checkout -rv1-2 asterisk zaptel libpri
Any help you might provide would be welcome; it's rather urgent that I get
this running.
At 01:04 PM 3/10/2006, Phil Freed wrote:
I have seen this in the archives any number of times -- but I have yet to
find a solution that works for me. Any suggestions you can offer would be
most appreciated.
Here are the answers to the questions I have seen asked in earlier
posts. The log contains:
Mar 10 12:26:29 WARNING[3015] chan_zap.c: Unable to specify channel 4: No
such device
Mar 10 12:26:29 ERROR[3015] chan_zap.c: Unable to open channel 4: No such
device
here = 0, tmp->channel = 4, channel = 4
Mar 10 12:26:29 ERROR[3015] chan_zap.c: Unable to register channel '4'
Mar 10 12:26:29 WARNING[3015] loader.c: chan_zap.so: load_module failed,
returning -1
Mar 10 12:26:29 WARNING[3015] loader.c: Loading module chan_zap.so failed!
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
Hardware:
Card: Freshmaker Rev J
#3: X100M Rev C
#4: S110M Rev A
There is only one PCI slot in this mini PC -- so I cannot try another slot.
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
# ztcfg -vv
Zaptel Configuration
======================
Channel map:
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
2 channels configured.
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
zaptel.conf:
============
unused=1,2
fxoks=4
fxsks=3
loadzone=us
defaultzone=us
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
zapata.conf
===========
context=incoming
group=1
signalling=fxs_ks
channel => 3
context=internal
group=2
signalling=fxo_ks
channel => 4
[incoming]
; incoming calls from the FXO port are directed to this context from
zapata.conf
exten => s,1,Answer()
exten => s,2,Echo()
[internal]
exten => 611,1,Answer()
exten => 611,2,Echo()
= = = = = = = = = = = = = = = = = = = = = = = = = = = =
# cat /proc/interrupts
CPU0 CPU1
0: 110443 103849 IO-APIC-edge timer
1: 10 0 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc
9: 1 0 IO-APIC-level acpi
12: 102 0 IO-APIC-edge i8042
14: 6414 2123 IO-APIC-edge ide0
15: 3659 3704 IO-APIC-edge ide1
169: 598 0 IO-APIC-level libata, eth0
177: 0 0 IO-APIC-level Intel ICH5
185: 3 0 IO-APIC-level ohci1394
193: 0 0 IO-APIC-level [EMAIL PROTECTED]:0000:00:02.0
201: 88523 90036 IO-APIC-level wctdm
NMI: 0 0
LOC: 214224 214223
ERR: 0
MIS: 0
==============
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
