--- yusuf <[EMAIL PROTECTED]> wrote:
> John Joseph wrote:
> > Hi
> > O
> >
> Hi ,
>
> this could a simple thing where you are mixing up
> signalling types for
> FXO and FXS.
>
> for example if i have 2 FXO (red)and 2 FXS (green)
>
> the FXO is setup with FXS signailling and FXS with
> FXO signalling
>
> so if my channels 1 and 2 is green and,
> 3 and 4 is red
>
> rmmod wctdm
> rmmod zaptel
>
> [zaptel.conf]
> fxoks=1-2
> fxsks=3-4
>
>
> [zapata.conf]
>
> signalling=fxo_ks
> channel =>1-2
> signalling=fxs_ks
> channel =>3-4
>
>
> modprobe zaptel
> modprobe wctdm
>
>
> hope this helps
> yusuf
>
>
>
Hi Yusuf
Thanks for the mail
I think it is not the case of mixing up of signaling
, because
even before editing zaptel.conf and zapta.conf , when
I run modprobe , I get one time this error entering
modprobe wctdm second time does not throw errors
This is what I get when I give modprobe
[EMAIL PROTECTED] etc]# modprobe zaptel
[EMAIL PROTECTED] etc]# modprobe wctdm
ZT_CHANCONFIG failed on channel 1: No such device or
address (6)
FATAL: Error running install command for wctdm
[EMAIL PROTECTED] etc]# modprobe wctdm
[EMAIL PROTECTED] etc]#
see , first time the modprobe wctdm throws error ,
second time , it does not
I am using RHEL4 , Digium
card Wildcard X101P board
Guidance requested
Thanks
Joseph John
___________________________________________________________
Win a BlackBerry device from O2 with Yahoo!. Enter now.
http://www.yahoo.co.uk/blackberry
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
