On 10 Mar 2006, at 21:25, Michael van Rooyen wrote:
I had a working 1.0.9 asterisk installation and tried to get a
Firefly IAX phone to register, but it was failing. I upgraded to
asterisk 1.2.5 and the PBX is working fine, but the IAX phone still
won't connect. Below is my iax.conf and the output from setting
iax2 debug while the phone tries to connect. Could somebody please
give me some pointers? This doesn't seem to be a normal loging
failed type scenario. Thanks.
[hayley]
type=friend
secret=hayley
host=dynamic
context=default
callerid "Hayley" <100>
permit=192.168.0.0/255.255.255.0
--------------------------------------------------------
outout from iax2 debug while phone is trying to connect:
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX
Subclass: REGREQ
Timestamp: 00000ms SCall: 22458 DCall: 00000 [192.168.2.1:4569]
USERNAME : hayley
REFRESH : 1800
You are only allowing Hayley to come from 192.168.0.0/255.255.255.0
but the rx packet is from
192.168.2.1
Asterisk is saying 2 != 0
Tim Panton
[EMAIL PROTECTED]
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
