Hi James - can you please post the brand/model of the card and supplier/cost etc.
Cheers, Mark. On 3/13/06, James Harper <[EMAIL PROTECTED]> wrote: > I have successfully placed a call into and out of the card from Asterisk > using vISDN. The current vISDN snapshot now contains the PCI id's for > the card so no patching should be required. > > Most of the initial testing failure was due to misconfiguration of vISDN > by me and a bad entry in my sip.conf resulting in one way audio. > > So I have established that at least 1 channel of 1 port works in TE mode > :). I hope to test it more thoroughly shortly, including multiple > concurrent calls and both TE and NT mode in operation. > > Someone from Cologne has raised concerns that the TE/NT switching may be > handled by a custom FPGA, which may be a showstopper. The manual is in > German so I can't read it to figure out if I should be using jumpers or > software to change modes. I'll have to do some deciphering :) > > James > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > ======================================================================== > iBurst Wireless Broadband from $34.95/month www.platformnetworks.net > Forward undetected SPAM to: [EMAIL PROTECTED] > ======================================================================== > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
