RE: [Asterisk-Users] problem configuring a digium quad E1 card

[David Masure]

 

Hi again,

 

Can you specify the pin order for each end ?

 

thanks

 

-----Message d'origine-----
De : JOSE MANUEL CORTES DAVID [mailto:[EMAIL PROTECTED]De la part de JOSE MANUEL CORTES DAVID
Envoyé : mercredi 15 mars 2006 16:28
À : Asterisk Users Mailing List - Non-Commercial Discussion
Objet : RE: [Asterisk-Users] problem configuring a digium quad E1 card

Hi

 

You need to use a cross-over E1 cable (not an ethernet cross-over one) 

 

Good luck

 

 

Jose Manuel Cortes David

X Semestre Ingenieria Electronica

PONTIFICIA UNIVERSIDAD JAVERIANA

---

De: [EMAIL PROTECTED] en nombre de David Masure
Enviado el: Mié 15/03/2006 9:41
Para: asterisk-users@lists.digium.com
Asunto: [Asterisk-Users] problem configuring a digium quad E1 card

 

Hi,

 

I bought a Digium Quad E1 card  model TE406P.  Till now, I can't make it work...

 

I mean, I have red alarm when I configure one E1.  The provider is in France (France Télécom) and I use the following zaptel config :

 

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

 

I'm using Linux 2.6.15 and when I run ztcfg -vvvv, it seems that all channels are configured...

 

So can someone give me an advice on that matter... maybe someone in France who already configured that type of access.

 

Also, I would like that you confirm the type of cable which can be used to connect the card to the Telco : can I use a straight cable or use a crossed cable with pair 1-2 connect to 4-5 ?

 

Thanks

 

Best regards!

 

David

 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users