Thanks for the input everyone. I though the second digit in the span = was the timing attribute, so only getting master timing on span 1.
We have had timing issues, can we confirm this? Thanks again James -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andy Kuo Sent: Thursday, 16 March 2006 6:43 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Unable to forward frame Hi, I think there should be only one timing source, but you have 3 here... Zaptel.conf span=1,1,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 Not sure if this is causing the problem though. Andy On 3/15/06, James Sturges <[EMAIL PROTECTED]> wrote: > Hi, > > I get this error in the log file when I call from my mobile to the Asterisk > server, but hang up the mobile before anyone picks up. > > Normally I would not worry about it, but I have been having some bad > experiences (only recently, after about 9 months of good operation) with > asterisk, although there have been related issues with Telco lines / > equipment and also some Asterisk initiated CRC errors after upgrading to > 1.2. So I have downgraded to 1.0.9. > > So I can isolate everything I have just installed a VERY VERY simple dial > plan. > > The setup is > > Telco <---> TDM 4 Port BRI <---> Ericsspn BP250 > > Extensions.conf (all of it!!!!) > > [default] > exten => s,1,Dial(ZAP/g4/1111211,45,t) > > [dialstring] > > exten => i,1,Playback(invalid) > exten => i,2,Hangup > exten => t,1,Hangup > > [te405p-frombp250] > > exten => _3XX,1,Answer > exten => _3XX,2,Dial(Sip/${EXTEN},6000,t) > exten => _3XX,3,Hangup > > exten => _X.,1,Answer > exten => _X.,2,Dial(Zap/g1/${EXTEN},6000,t) > exten => _X.,3,Hangup > > [te405p-intelstra] > > exten => _X.,1,Answer > exten => _X.,2,Dial(Zap/g4/${EXTEN},6000,t) > exten => _X.,3,Hangup > > [from-sip] > > exten => s,1,Dial(SIP/3332,45,t) > > exten => _0X.,1,Answer > exten => _0X.,2,Dial(Zap/g1/${EXTEN:1},6000,t) > exten => _0X.,3,Hangup > > exten => _X.,1,Answer > exten => _X.,2,Dial(Zap/g4/1111${EXTEN},6000,t) > exten => _X.,3,Hangup > > Zapata.conf > [channels] > context=default > musiconhold=default > switchtype=euroisdn > usecallerid=yes > cidsignalling=v23 > cidstart=polarity > hidecallerid=no > callwaiting=no > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > echotraining=800 > rxgain=0.0 > txgain=0.0 > > group=1 > context=te405p-intelstra > ;context=te405p-ext > pridialplan=local > signalling=pri_cpe > ;overlapdial=yes > callerid=asreceived > channel=>1-15, 17-31 > ;channel=>32-46, 48-62 > > group=4 > context=te405p-frombp250 > ;context=te405p-in > pridialplan=local > signalling=pri_net > overlapdial=yes > callerid=asreceived > channel=>94-108, 110-124 > ;channel=>32-46, 48-62 > > > Zaptel.conf > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > bchan=17-31 > span=2,0,0,ccs,hdb3,crc4 > bchan=32-46 > dchan=47 > bchan=48-62 > span=3,0,0,ccs,hdb3,crc4 > bchan=63-77 > dchan=78 > bchan=79-93 > span=4,0,0,ccs,hdb3,crc4 > bchan=94-108 > dchan=109 > bchan=110-124 > > loadzone=au > defaultzone=au > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
