Re: [Asterisk-Users] Re: transfers/parked calls + polycom 501

[sdgesa gaeharth]

I am using the latest firmware and bootrom and this is a problem with all 12 polycom  501s that we have in the office. If I want to transfer to 1005 for example while on the phone with the original caller, I press transfer -> blind -> type "1",  "0" then the phone clears the display and the transfer fails. It only allows me to dial the first two digits of the extension I want to transfer to. It even happens when I dial local sip to local sip, not just sip to pstn. This seems like a config mistake I made.....

thanks


Noah Miller <[EMAIL PROTECTED]> wrote:

Hi -

> I am not sure what I did but blind transfers do not work. The Polycom does
> not allow me to dial the extension of the person I want to transfer to after
> I hit:
>
> transfer -> blind

I would strongly suggest getting the latest firmware, and using the sample
configuration files with that firmware to set up your phone. This SHOULD
work. If it still does not work after doing this, there may be a hardware
issue with your phone.

- Noah

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

---

Brings words and photos together (easily) with
PhotoMail - it's free and works with Yahoo! Mail.

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users