Please tell me the obvious mistake I'm making here. (And yes, I well
know about NAT and one-way audio problems in general.)
I want to try the new T.38 passthrough stuff, downloaded it, built it,
tested it with an SPA-2100 and can hear announcements fine but echo test
shows no audio outbound (i.e. SPA to Asterisk).
Registered the second SPA-2100 channel with an Asterisk 1.0.10 server in
the same rack (IP address differs by 1) and it works fine (which
suggests no problem with the NAT router the SPA-2100 is behind).
Here are the various SVN checkouts I did (all have the problem -- if you
can't guess I'm no SVN guru -- SCCS was the last version control system
I mastered).
svn checkout
http://svn.digium.com/svn/asterisk/team/oej/t38passthrough asterisk
svn checkout http://svn.digium.com/svn/asterisk/trunk asterisk
svn checkout http://svn.digium.com/svn/asterisk/branches/1.2 asterisk-1.2
Here is the sip.conf entry:
[t38.nvc.a]
type=friend
context=t38-inbound
callerid=John Doe <1234>
host=dynamic
secret=xxyyzz
qualify=2000
nat=yes
accountcode=NVC06
type=friend
dtmfmode=rfc2833
canreinvite=no
What else do you need? Where do I look? I'm assuming the problem is
either in the manner I'm checking out the code or in some 1.2-specific
config thing I'm overlooking (the missing no-one-way-audio option in
sip.conf?)
--
George Pajari, netVOICE communications 604 484 VOIP (484 8647 x102)
Open Source VoIP/Telephony Specialists 1 877 NET VOIP (638 8647 x102)
www.netvoice.ca www.ip-centrex.ca
www.digium.ca www.grandstream.ca www.sipura.ca www.snom.ca
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
