I had very mysterious hangups of PSTN outbound calls which I traced to zapata.conf. I had increased rx_gain = 10 and tx_gain = 10 because volume was always low because Polycom phone was always resetting the volume. Anyway, I patched my sip.cfg for Polycom so my volume would stay at the user's setting, and reset the zap gains to 0, and my hangups went away. [Maybe the high gain was causing an output to saturate and a small amount of silence looked like a polarity reversal - SWAG].

On Mar 20, 2006, at 2:29 PM, Dave wrote:

Hello, I have started having a strange problem.
Asterisk is connected via 4 analog lines to  PSTN and
we have SIP phones internally. All was working fine
but recently each time a user calls from PSTN and when
he is leaving a voicemail for someone, the caller gets
disconnected after 30 secs. We have AMP installed.
This is reproducible and is happening always. It seems
that Asterisk is disconnecting because of a "silence"
of 10 secs. But that is not case because the caller is
still leaving a message. When calling from a SIP to
SIP phone, this issue does not occur.



Here is a log:
-----

    -- Executing VoiceMail("Zap/3-1", "u533") in new
stack
    -- Playing
'/var/spool/asterisk/voicemail/default/533/temp'
(language 'en')
    -- Playing 'vm-intro' (language 'en')
    -- Playing 'beep' (language 'en')
    -- Recording the message
    -- x=0, open writing:
/var/spool/asterisk/voicemail/default/533/INBOX/msg00
    -- x=1, open writing:
/var/spool/asterisk/voicemail/default/533/INBOX/msg00
    -- x=2, open writing:
/var/spool/asterisk/voicemail/default/533/INBOX/msg00
    -- Recording automatically stopped after a silence
of 10 seconds
    -- Playing 'auth-thankyou' (language 'en')
    -- Executing Hangup("Zap/3-1", "") in new stack

  == Spawn extension (macro-vm, s-NOANSWER, 2) exited
non-zero on 'Zap/3-1' in m
  == Spawn extension (macro-exten-vm, s, 8) exited
non-zero on 'Zap/3-1' in macr
  == Spawn extension (aa_1, 240, 1) exited non-zero on
'Zap/3-1'
    -- Executing Hangup("Zap/3-1", "") in new stack
  == Spawn extension (aa_1, h, 1) exited non-zero on
'Zap/3-1'
    -- Hungup 'Zap/3-1'
    -- Hungup 'Zap/1-1'

---------------

Any pointers/suggestions will be appreciated.

Dave

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Bill

William M. Conlon, P.E., Ph.D.
To the Point
345 California Avenue Suite 2
Palo Alto, CA 94306
   vox:  650.327.2175 (direct)
   fax:  650.329.8335
mobile:  650.906.9929
e-mail:  mailto:[EMAIL PROTECTED]
   web:  http://www.tothept.com

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to