Douglas Garstang wrote:
> I've been using realtime for sip users information.
>
> I noticed that when you are doing this, if you do a 'reload' or restart
> asterisk, the information in a 'sip show peers' goes away. When I do this,
> MWI stops working. I always though MWI used the astdb file ('database show')
> to determine where to send MWI but it must be using 'sip show peers' because
> when this is cleared, it stops working.
>
> When I stop using realtime and instead provision users in sip.conf, a reload
> or restart DOES NOT clear 'sip show peers'. It must be populating this list
> from the astdb file in that case.
>
> I'm going to scoot over to bugs.digium.com and report this as a bug, because
> this is a real show stopper, and completely nullifies Realtime's use for us.
>
Doug,
I think this is documented behaviour. With realtime the peers do not
show up under sip show peers, and MWI does not happen. I think though if
you use rtcachefriends=yes in your [general] section of sip.conf that it
will work as you desire.
Hope this helps.
--
-Barry Flanagan
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
