On 3/21/06, Nabeel Jafferali <[EMAIL PROTECTED]> wrote: > > try SetCallerId or set callerid=name <(xxx)xxx-xxxx> in sip.conf or > > iax.conf (depending on what you are using) > > I am not using SIP or IAX2 clients. As mentioned in the original email, this > is from PRI to PRI. > > I could use SetCallerID, but the zapata.conf method should work. >
Agreed, but if all else fails, set a different context for that PRI, and in that context, force the CallerID using SetCallerID before making the onward call. It is possible that the Zaptel "callerid=" field does not accept the "Name" <number> format (I'd have to look at the source to check, and you didn't say which veriosn you run). Have you tried just putting a number in. PS. While I'm here, is the A102d worth the money? I assume it works as easily as the A104d? Thanks, Steve _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
