Matt Loretitsch wrote:
Just throwing out this question. integrating with Altiware server.
PRI appears to be okay. It keeps trying to move my call to a
different channel...usually channel 1. This is the deal here:
Moving call from channel 23 to channel 1
Then the following errors after no audio then hanging up manually:
Mar 24 17:46:17 WARNING[1315]: chan_zap.c:7792 pri_fixup_principle:
Call specified, but not found?
Mar 24 17:46:17 WARNING[1315]: chan_zap.c:8874 pri_dchannel: Hangup on
bad channel 0/1 on span 1
Using asterisk 1.2.5, zaptel 1.2.4, and libpri 1.2.2 as they are the
current stable releases.
I've tried changing the timing sources around. Incoming calls on the
PRI always appear to work, outgoing calls cause this problem. The
only time an outgoing call gets complete is if I send it to channel 1
on the pri. When it moves the call it seems to connect, but I get no
audio in either direction.
Anyone tackle such a beast?
I would guess the remote server only allows calls to come in on channel
1. Thats why it requests a channel change to 1 when the call is setup.
I think that in the call SETUP message Asterisk requests channel 23 but
the remote server denies that channel and instead asks for a move to
channel 1. You will need to check up on the Altiware config.
--
Andres
Technical Support
http://www.telesip.net
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
