RE: [Asterisk-Users] RE: IAX Incoming/Outgoing

Sat, 25 Mar 2006 10:53:02 -0800

Just a few things Doug and they are just constructive criticism so don’t take them the wrong way.

 

  1. You hijacked some else’s thread about a SIP trunk problem.  Very frowned upon and will decrease people willing to help..
  2. All of your posts are so dramatic and many times negative which will also decrease willing help.
  3. You are posting way too much without experimenting and thinking things through.  Take the list as a place to post knowledge and a place to get answers when you have tried everything you can think of.

 

I had a rule to put your emails directly in my deleted items folder from the first day you started posting to this list totally bashing asterisk and the community.  I recently had to re-do my machine so the rule was lost.  I am hoping that I don’t have to put it back in place.

 

Now back to your problem. 

Simplify your conf.  Remove the keys and use secret=

Change your dial statement to Dial(iax2/username:[EMAIL PROTECTED])

Are you dialing from PBX3?

 

Thanks,

Steve Totaro

 

From: Douglas Garstang [mailto:[EMAIL PROTECTED]
Sent: Saturday, March 25, 2006 1:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] RE: IAX Incoming/Outgoing

 

This is INSANE! My calling system has this iax.conf:

 

[pbx1]
type=friend
auth=rsa
inkeys=pbx1
outkey=pbx1
context=global_pbx_transfer
host=pbx1.ipt.yyy.com
deny=0.0.0.0
permit=xxx.187.142.203

 

[pbx2]
type=friend
auth=rsa
inkeys=pbx2
outkey=pbx1
context=global_pbx_transfer
host=pbx2.ipt.yyy.com
deny=0.0.0.0
permit=xxx.187.142.233

 

[pbx3]
type=friend
auth=rsa
inkeys=pbx3
outkey=pbx1
context=global_pbx_transfer
host=pbx3.ipt.yyy.com
deny=0.0.0.0
permit=xxx.187.142.234

 

and here's how I am dialling PBX2... as you can see I am dialling _PBX2_:

exten => s-CHANUNAVAIL,1,Dial(IAX2/pbx2/[EMAIL PROTECTED],25,g)

 

 

When I run an iax debug on the caller, I see

   VERSION         : 2
   CALLED NUMBER   : 2944099
   CODEC_PREFS     : (ulaw|g729)
   CALLING NUMBER  : 2944093
   CALLING PRESNTN : 0
   CALLING TYPEOFN : 0
   CALLING TRANSIT : 0
   CALLING NAME    : Foo

   LANGUAGE        : en
   CALLED CONTEXT  : global_pbx_transfer
   FORMAT          : 4
   CAPABILITY      : 65535
   ADSICPE         : 2
   DATE TIME       : 2006-03-25  11:24:58

 

Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX     Subclass: ACK   
   Timestamp: 00005ms  SCall: 00004  DCall: 00006 [216.187.142.204:4569]
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX     Subclass: AUTHREQ
   Timestamp: 00010ms  SCall: 00004  DCall: 00006 [216.187.142.204:4569]
   AUTHMETHODS     : 4
   CHALLENGE       : 627190238
   USERNAME        : pbx3

 

What on gods green earth would possibly make asterisk want to send a username of PBX3???

 

 

-----Original Message-----
From: Douglas Garstang
Sent: Saturday, March 25, 2006 11:16 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] RE: IAX Incoming/Outgoing

Well, right now I have this on box1:

 

[pbx1]
type=friend
auth=rsa
inkeys=pbx1
outkey=pbx1
context=global_pbx_transfer
host=pbx1.ipt.yyy.com
deny=0.0.0.0
permit=xxx.187.142.203

 

[pbx2]
type=friend
auth=rsa
inkeys=pbx2
outkey=pbx1
context=global_pbx_transfer
host=pbx2.ipt.yyy.com
deny=0.0.0.0
permit=xxx.187.142.233

 

[pbx3]
type=friend
auth=rsa
inkeys=pbx3
outkey=pbx1
context=global_pbx_transfer
host=pbx3.ipt.yyy.com
deny=0.0.0.0
permit=xxx.187.142.234

 

 

 

and this on box2:

[pbx1]
type=friend
auth=rsa
inkeys=pbx1
outkey=pbx2
context=global_pbx_transfer
host=pbx1.ipt.yyy.com
deny=0.0.0.0
permit=xxx.187.142.203

 

[pbx2]
type=friend
auth=rsa
inkeys=pbx2
outkey=pbx2
context=global_pbx_transfer
host=pbx2.ipt.yyy.com
deny=0.0.0.0
permit=xxx.187.142.233

 

[pbx3]
type=friend
auth=rsa
inkeys=pbx3
outkey=pbx2
context=global_pbx_transfer
host=pbx3.ipt.yyy.com
deny=0.0.0.0
permit=xxx.187.142.234

 

And for some reason the calling system is sending pbx3 as the username.... Why would it do that?

 

-----Original Message-----
From: Steve Totaro [mailto:[EMAIL PROTECTED]
Sent: Saturday, March 25, 2006 1:58 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] RE: IAX Incoming/Outgoing

No, you need to use different names.  You can use friend rather than having separate entries for in/out.  What do you get when you type iax2 show peers?  You should be able to use friend and the same three entries on each box with the exception of changing the IP addresses.

 

From: Douglas Garstang [mailto:[EMAIL PROTECTED]
Sent: Saturday, March 25, 2006 12:37 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] RE: IAX Incoming/Outgoing

 

12 hours later... still playing with this. Anyone got any ideas?

 

Doug.

-----Original Message-----
From: Douglas Garstang
Sent: Friday, March 24, 2006 10:53 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: IAX Incoming/Outgoing

I'vce got three Asterisk systems here that I'd like to be able to place calls between with IAX. As usual, I've spent several hours playing with it, really getting nowhere. Asterisk is so mentally draining. Each system, pbx1, pbx2, pbx3, should be able to connect to every other. Do I need separate user/peers or can I combine them into a single user=friend for each system? if I place a call from pbx1 to pbx2 as pbx1_outbound, it should work.... the docs say that pbx2 will look for a [pbx1_outbound] .... oh dear... this doesn't make sense any longer.

 

Has anyone got a working example they could supply? Can I do all this with just three peers and one username?

 

Thanks... Doug.

 

[pbx1_inbound]
type=user
auth=rsa
inkeys=pbx1
username=pbx1_inbound
deny=0.0.0.0
permit=xxx.187.142.203
context=global_pbx_transfer

 

[pbx1_outbound]
type=peer
auth=rsa
outkey=pbx1
username=pbx1
host=pbx1.ipt.yyy.com

 

[pbx2_inbound]
type=user
auth=rsa
inkeys=pbx2
username=pbx2_inbound
deny=0.0.0.0
permit=xxx.187.142.204
context=global_pbx_transfer

 

[pbx2_outbound]
type=peer
auth=rsa
outkey=pbx1
username=pbx1
host=pbx2.ipt.yyy.com

 

[pbx3_inbound]
type=user
auth=rsa
inkeys=pbx3
username=pbx3_inbound
deny=0.0.0.0
permit=xxx.187.142.234
context=global_pbx_transfer

 

[pbx3_outbound]
type=peer
auth=rsa
outkey=pbx1
username=pbx3
host=pbx3.ipt.yyy.com

 

-----Original Message-----
From: George Vagenas [mailto:[EMAIL PROTECTED]
Sent: Fri 3/24/2006 10:30 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: George Vagenas
Subject: Re: [Asterisk-Users] SIP trunk problem

Marty,

But with the same 128 bit upstream circuit, directly connecting the SJPhone the Stun server and using ulaw,  everything is perfect. The problem comes when i am putting Asterisk in the picture.

On 3/25/06, Martin Joseph <[EMAIL PROTECTED]> wrote:


On Mar 24, 2006, at 1:19 PM, George Vagenas wrote:

> Hi all,
>
>  I have the following problem, working with a SIP provider, if i setup
> my SJPhone to register directly to their STUN server and working over
> a 384/128 ADSL i have a really good quality, but then if i configure
> Asterisk to register to the same provider over the same 384/128
> circuit the quality is REALLY BAD. The obvious difference is that
> using directly the SJPhone i am using STUN, while when i am using
> Asterisk to connect to my SIP provider and the SJPhone to connect to
> Asterisk i have the following configuration for Asterisk.
>
>
>  register => user:[EMAIL PROTECTED]
>
>  [mysip]
>  host=sip.provider.com
>  type=peer
>  qualify=yes
>  username=user
>  secret=pass
>  nat=yes
>  disallow=all
>  allow=ulaw
>
>
>  I am using Asterisk 1.2.3.
>
>  I think that i am missing something or misconfigure something because
> for sure its not matter of the ADSL since in both tests i am doing i
> am using the same circuit.
>
>  Any idea please????
I don't think using ulaw on a 128K bit upstream circuit is a good
choice.  I would use g729.

Marty

PS I can't be the stun server if asterisk is working, but quality is
poor.

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to