Well well, This is not right at all. You should have like 1001 for TxABCD and 1011 for RxABCD.
That's why you are getting blocked. Something called my attention: Bipolar Violation: you have some of it, which confirms that there's something wrong. Indeed, your call file is ok. That's why I asked you about calling some extensions inside Alcatel box from a sip and/or iax2 phone. Question: if you have PRI, why are you using R2? Sugestion: check Alcatel's setup for this card. On Alcatel side, do you have any alarms or errors? BTW, do you use any kind of IM? []'s MM -----Original Message----- From: Krzysztof Drewicz <[EMAIL PROTECTED]> To: Asterisk Users Mailing List - Non-Commercial Discussion <[email protected]> Cc: Sent: Mon, 27 Mar 2006 02:49:47 +0200 Delivered: Sun, 26 Mar 2006 18:47:47 Subject:[Asterisk-Users] help on mfc/r2 Melcon Moraes napisaÅ(a): > but can you make a simple call > to your regular phone number from some SIP/IAX2 softphone/hardphone? Right now? It's not working. I could use (i have needed hardware). Data: SIP/extension-number Or even capi/zap channel. When e400p is configured as a E1/PRI and connected to diffrent card, my ".call"-file works (I hear asterisk-demo after receivng phone). So i assume my .call file is OK. > What do you have in zaptel.conf file? For instance, I have this on my: > > span=1,1,0,cas,hdb3 > cas=1-15:1101 > cas=17-31:1101 Me too. I've seen dchannel=16 somewhere on the net, but it makes me very confused, as R2 imvho is beeing "digigit-digit" on every litle "time-slot"/channel. > hing > to do with that. What happens if you use Unicall/g1 instead of just > channel 1 of Unicall? Same, it's still: *CLI> -- Attempting call on Unicall/g1/363 for application playback(demo-thanks) (Retry 1) Mar 27 01:42:00 NOTICE[13840]: channel.c:2437 __ast_request_and_dial: Unable to request channel Unicall/g1/363 Mar 27 01:42:00 NOTICE[13840]: pbx_spool.c:269 attempt_thread: Call failed to go through, reason 0 > > Do you have zttool compiled? How those bits are showed up? The timing â Current Alarms: No alarms. â â Sync Source: Tormenta 2 (PCI) Quad E1 Card â â IRQ Misses: 0 â â Bipolar Viol: 609 â â Tx/Rx Levels: 0/ 0 â â Total/Conf/Act: 31/ 30/ 30 â â 1111111111222222222333 ââââââââ â â 1234567890123456789012345789012 â Back â â â TxA 111111111111111 111111111111111 ââââââââ â â TxB 111111111111111 111111111111111 â â TxC 000000000000000 000000000000000 â â TxD 111111111111111 111111111111111 â â ââââââââ â â RxA 000000000000000 000000000000000 â Loop â â â RxB 111111111111111 111111111111111 ââââââââ â â RxC 000000000000000 000000000000000 â â RxD 111111111111111 111111111111111 â â â > source is correctly set up? Seems that your master timing sync source is > the Alcatel, so you should use "span=1,1,0" > ok, -- Krzysztof Drewicz <[EMAIL PROTECTED]> +48 22 34 54 363 E-mail classificado pelo Identificador de Spam Inteligente Terra. Para alterar a categoria classificada, visite http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1143420467.988851.6696.balcomo.terra.com.br,6575,Des15,Des15 --Original Message Ends-- -- Melcon Moraes <[EMAIL PROTECTED]> _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
