Yes, my mistake in /tftpboot/SEP<MAC>.cnf.xml. Having said that, Please
double check that you have set the line:
permit=192.168.1.90/255.255.255.255 ; This device can register only
using this ip address
or in your case:
permit=10.0.0.175 /255.255.255.255 ; This device can register only
using this ip address
in the /etc/asterisk/sccp.conf.
The TFTP errors are related to automatically updating firmware, custom
ringtones, and what I believe is SCCP encryption support which is not
necessary.
J
Tomislav Parčina wrote:
In article <[EMAIL PROTECTED]>, [EMAIL PROTECTED] says...
Best bet is to get "Asterisk Chan_Sccp" http://chan-sccp.berlios.de/
1.) setup your /etc/asterisk/sccp.conf with something like:
2.) setup lines 30/31 as a custom extension in astersik (i used amp)
and had it dial SCCP/30 and SCCP/31 as needed
3.) setup /tftpboot config for SEP<MAC>.xml
First thank you for your mail and instructions that you have provide to me.
Now, I have done everything you said except and 3.) file name isn't SEP<MAC>.xml but
SEP<MAC>.cnf.xml
When Cisco 7970 boots up it looks for this on tftp.
27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting CTLSEP0016C87754CE.tlv :
File does not exist
27.3.2006 15:24 :Sending SEP0016C87754CE.cnf.xml to (10.0.0.175)
27.3.2006 15:24 :Sent SEP0016C87754CE.cnf.xml to (10.0.0.175), 2312 bytes
27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting loads : File does not
exist
27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting td-sccp.jar : File does
not exist
27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting g3-tones.xml : File does
not exist
7970 had this firmware version:
Load File: TERM70.DEFAULT
App Load ID: Jar70.2-9-1-45.sbn
JVM Load ID: CVM70.2-0-1-45.sbn
OS Load ID: cnu70.2-7-5-50.sbn
Boot Load ID: 7970_64060118.bin
The problem is that 7970 never registers to *. I have entered asterisk IP address at
2 places in SEP<MAC>.cnf.xml.
*CLI> show channeltypes
Type Description Devicestate Indications Transfer
---------- ----------- ----------- ----------- --------
MGCP Media Gateway Control Protocol no yes no
SIP Session Initiation Protocol (S yes yes yes
Feature Feature Proxy Channel Driver no yes no
Agent Call Agent Proxy Channel yes yes no
Phone Standard Linux Telephony API D no no no
Zap Zapata Telephony Driver no yes no
Local Local Proxy Channel Driver no yes no
IAX2 Inter Asterisk eXchange Driver yes yes yes
SCCP Skinny Client Control Protocol yes yes no
Seams that SCCP is installed correctly. But phone never registers (on lover
left corner of 7970 I have circle/clock and word Registering).
*CLI> sccp show devicestypes
NAME ADDRESS MAC Reg. State
================ =============== ================ ==========
*CLI>
Have I done something wrong?
--
Tomislav Parcina
tparcina#lama.hr
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
