Steve Kennedy wrote:
On Tue, Mar 28, 2006 at 07:40:06PM +0000, Tofik Suleymanov wrote:
Each of the two lines have their own entry in sip.conf and i can see
each line registered in 'sip show peers'.
I can dial each line from outside successfully but when one line is busy
i can't reach the second line (it immediately sends me to the
voicemail).I've also tried to change the timeouts in dial command but
seems that it doesn't matter.
Any other advice ?
You haven't got codec negotiation set-up properly so it's still running
out of g.729 and then it will act as busy
I have
dtmfmode=rfc2833
disallow=all
allow=g729
allow=gsm
allow=alaw
allow=ulaw
allow=g723.1
So should try g.729 first, then gsm (which unfortunately SPA don't
support), etc etc.
Steve
Thank you very much !
after playing a bit with codecs i've managed my sipura lines to work
properly.
Again, thank you very much for quick and effective help !
Tofik Suleymanov
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
