Melcon Moraes wrote:
What PBX is that? What do you see at CLI> when you call that port?
Actually, this behavior exists in the PBX. I need to make asterisk works like
a fxs that will receive the calls, and then route them in two diferents SIP.
Using your example:
I call to the extension 100 or extension 101. This will be routed to
asterisk. Inside a dialplan, how could I know if the incomming call was to
100 ou 101?
This is produced when I receive a call. In the moment I receive the
call, I need to know if it was dialed 101 or 100 in the first pbx, just
before Asterisk.
-- Starting simple switch on 'Zap/3-1'
-- Executing Dial("Zap/3-1", "SIP/12345|10") in new stack
-- SIP Seeding peer from astdb: '12345' at [EMAIL PROTECTED]:5061
for 1800
-- Called 12345
Mar 30 10:53:23 WARNING[5735]: channel.c:2698
ast_channel_make_compatible: No path to translate from
SIP/12345-8a30(256) to Zap/3-1(68)
Mar 30 10:53:23 WARNING[5735]: chan_sip.c:2530 sip_write: Asked to
transmit frame type 4, while native formats is 256 (read/write = 256/256)
Mar 30 10:53:23 WARNING[5735]: chan_sip.c:2530 sip_write: Asked to
transmit frame type 4, while native formats is 256 (read/write = 256/256)
-- SIP/12345-8a30 is ringing
-- SIP Seeding peer from astdb: '12345' at [EMAIL PROTECTED]:5061
for
1800
Thanks in advance.
Fernando Lujan
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
