Re: [Asterisk-Users] Re: BRI cards, HFC, and bristuff - a generalquestionto clear up my understanding.

[Filip Drągowski]

It's look like this: incomming connection channel = Zap/7, dstchannel = SIP/200  (SIP hardphone) when SIP/200 hangs up Asterisk do: - Changing state for Zap/7 - state 1 (Not in use)  and - Changing state for SIP/200 - state 1 (Not in use) but don't send ISDN-Q.931 DISCONNECT message to finally release channel. astersik get DISCONNECT from network provider Similar is for outgoing connection from SIP/200 to Zap/7 Asterisk (sometimes) send DISCONNECT but rarely. is this a behaviour of confilcts betwwen bristuff-card and zaptel-cards ? Filip D. Thanks.   I think our problem ca be similar. Have you tried to call from analog phone #1 to another analog phone #2? It works. But when you try to call vice versa from #2 to #1 it does not work. When you restart asterisk it works again – but only one direction.   -David From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Filip Drągowski Sent: Friday, March 31, 2006 1:40 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Re: BRI cards, HFC, and bristuff - a generalquestionto clear up my understanding.   Asterisk 1.2.4 + bristuff-0.3.0-PRE-1l + libpri-1.2.2 +  zapte-1.2.3 + *CLI> zap show status Description                              Alarms     IRQ        bpviol     CRC4 quadBRI PCI ISDN Card 1 Span 1 [TE] (caˇ OK         0          0          0 quadBRI PCI ISDN Card 1 Span 2 [TE] (caˇ OK         0          0          0 quadBRI PCI ISDN Card 1 Span 3 [TE] (caˇ OK         0          0          0 quadBRI PCI ISDN Card 1 Span 4 [TE] (caˇ OK         0          0          0 Wildcard TDM400P REV E/F Board 1         OK         0          0          0 and it seems to work. Only sip phones connected to *PBX (by gateways or ethernet) as i remember installation process: 1. bristuff patching asterisk/libpri/zaptel 2. libpri/zaptel/asterisk install 3. zaptel/quozap/wctdm modules installation Runs on Debian 3.1. kernel 2.6.15.4 but i have problem: when SIP hardphone hangup connection (SIP/ <-> Zap/) asterisk don't send Q.931 DISCONNECT message, and i don't have any idea how to fight with that. Filip D. Does anyone test Asterisk 1.2.X + bristuff-0.3.X and TDM card? We can't get it to work.   -David   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Julian J. M. Sent: Friday, March 31, 2006 1:44 AM To: Chris Earle; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Re: BRI cards, HFC,and bristuff - a general questionto clear up my understanding.   I have 2 different instalations with 1 Billion HFC Card (1port), and 1 TDM400. Asterisk 1.0.10+bristuff+florz patch.   Only issue is that you must load all modules (wcfxs, zaphfc) before runing ztcfg, otherwise nothing works.   Everything works ok, even faxing.   Julian.   On 3/30/06, Chris Earle <[EMAIL PROTECTED]> wrote:   What?  After hours of searching for anything to help me, I found this comment about zaptel cards in systems with bristuff-cards (junghanns     for me   in this case)   I havent' seen any other reports of this sort of behaviour --- can     anyone   confirm whether they've got a QuadBRI and TDM400P card working     together in   one machine?     thanks :-S       "Zoa" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED]...     <snip>     We stopped with the bristuff as bristuff will break any other zaptel cards in the same system. (pri seems logical, why the tdm card also broke is unknown to me).       <snip>     _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --   Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit:    http://lists.digium.com/mailman/listinfo/asterisk-users           _______________________________________________ --Bandwidth and Colocation provided by Easynews.com --   Asterisk-Users mailing list To UNSUBSCRIBE or update options visit:    http://lists.digium.com/mailman/listinfo/asterisk-users       _______________________________________________ --Bandwidth and Colocation provided by Easynews.com --   Asterisk-Users mailing list To UNSUBSCRIBE or update options visit:    http://lists.digium.com/mailman/listinfo/asterisk-users   ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ _______________________________________________ --Bandwidth and Colocation provided by Easynews.com --   Asterisk-Users mailing list To UNSUBSCRIBE or update options visit:    http://lists.digium.com/mailman/listinfo/asterisk-users     ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users