The * server one TDM04B card and my dialplan:
exten => 080.,1,Dial(Zap/g1/${EXTEN})
All four FXO ports has group=1 in zapata.conf
After dialing 0800012345 from a FXS extension, with one DTMF detector
tapped on the line, I found * dialed 0,8,0,0,0,1,2,3,4 in even interval,
delay longer, and then the last 5. Sometimes this behavior causes PSTN
to repsond with "the number you dialed is non-existing".
Best guess given the above... asterisk is probably detecting a tone or
noise coming from the central office, and/or, detecting tip-ring open or
polarity reversal during the dialing. (I'm not familiar with your
country telco standards, so this might not be all that helpful.)
Try...
busydetect=yes
busycount=6
callprogress=no
towards the top of your zapata.conf statements.
If those don't have any impact, post a piece of your zapata.conf file.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
