I dont have that option in my phone, this is software 8.2 (p003-08-02 if i remember correctly)
~Shaun "Doug Lytle" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > Shaun wrote: >> I have a asterisk server running on site listening on a public ip. >> Tonight I attempted to connect a Cisco 7960 phone from my home location >> via sip but failed. My home network is simple, Cox cable connection >> hooked to a linksys wrt router. The firewall on the linksys router is >> disabled and I even setup dmz to the phones ip as a last resort. I >> removed the linksys router and plugged the phone directly into the cable >> modem and now the phone can connect fine and works. I pasted below the >> sip debug output, anybody know what's going on or have experience with >> this? > You need to turn on the NAT support for the 7960 on the phone itself. > > Settings --> SIP Configuration -->NAT Enabled (Y/N) > > Doug > > -- > Ben Franklin quote: > > "Those who would give up Essential Liberty to purchase a little Temporary > Safety, deserve neither Liberty nor Safety." > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
