Hi, thanks to you all!
Finally echo cancellation works correctly on my card (eicon diva server
4/bri)
Armin, that fixed the problem, thanks again!
Giuseppe
Armin Schindler ha scritto:
Which version of divas driver do you use?
If it's the v2 driver (from melware.de or in-kernel 2.6), then you need to
set
echocancelold=yes
in the interfaces sections.
If you use the new driver v3 (Eicon source RPM),
echocancelold=yes may not be set.
Armin
On Mon, 3 Apr 2006, Giuseppe wrote:
Thanks Avi Miller!
Here it is my capi.conf file
[general]
nationalprefix=039
;;internationalprefix=011
rxgain=1.0
txgain=2.0
alaw=yes ;
[ISDN3] ;this example interface gets name 'ISDN1' and may be any
ntmode=yes ;if isdn card operates in nt mode, set this to yes when
using NT-mode, ptp should be set in any case
incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, *
== any
controller=3 ;capi controller number to use
group=1 ;dialout group
;softdtmf=on ;enable/disable software dtmf detection, recommended
for AVM cards
;relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf
detection
;accountcode= ;Asterisk accountcode to use in CDRs
context=isdn3in ;context for incoming calls
holdtype=local ;If set to 'hold', when Asterisk puts the call on
hold, ISDN HOLD will be used.
immediate=yes ;immediate start of pbx with extension 's' if no
digits were received on incoming call (no destination number yet)
;echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression
echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation
(possible values: 'no', 'yes', 'force', 'g164', 'g165')
;echocancelold=yes ;use facility selector 6 instead of correct 8
(necessary for older eicon drivers)
echotail=64 ;echo cancel tail setting
bridge=yes ;native bridging (CAPI line interconnect) if available
callgroup=1 ;Asterisk call group
;deflect=1234567 ;deflect incoming calls to 1234567 if all B channels
are busy
devices=2 ;number of concurrent calls on this controller (2 makes
sense for single BRI, 30 for PRI)
Is there something wrong?
Thanks again!
Giuseppe
Avi Miller ha scritto:
Giuseppe wrote:
I'm always getting this error when echo cancellation should start.
What does your /etc/asterisk/capi.conf look like?
Also, have you configured your Eicon correctly? You may need to enable
the Eicon web interface and check that each port is correct.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
