Interesting about your tellco. A the tellco I have dealt with sent the DISCONNECT message when a non-operational number is called. The usual messages will come in the this order
1. proceeding 2. one or more progressing 3. disconnect with the cause value(if number is non-operational, or the network or destination is busy) On the other hand, upon receiving disconnect from tellco, Asterisk does not really need to disconnect right away if listening to the telco message is desired. (there might be a switch you can set for this). -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Kohlsmith Sent: Tuesday, April 04, 2006 9:08 AM To: [email protected] Subject: Re: [Asterisk-Users] Hangupcause is not enough on PRI On Tuesday 04 April 2006 08:47, Pibix wrote: > Asterisk does not allow the user to hear the audio message form the > telco, instead it cuts the call. Any other legacies PRI PBX I've > tested allow the user to hear the audio message from the telco. Can we see a pri debug trace for a call that does this? I think this might be more of a signaling issue, as my T1 PRI (Bell Canada) does not do this at all. Asterisk doesn't disconnect the call until it encounters something that issues a Hangup(), or the telco sends the DISCONNECT message. -A. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
