IT shows that it was 'FIXED IN HEAD' Head at the time is what has become the 1.2.X tree, so it should be in there. I do not have the tools to try this but I would like to see if it is posible. Look at yiour debugs and see if it is working.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Edward de Zeeuw > Sent: Friday, March 31, 2006 3:17 PM > To: [email protected] > Subject: [Asterisk-Users] Display Name > > I have an NI2 PRI connection to a 5ESS switch. I am > explicitly told to use NI2 as the protocol, not 5ESS. > I am running Asterisk 1.2.4. > > When making calls to the PSTN, Asterisk sends the calling > name as part of the display information element in the SETUP > message. I need to be able to send the calling name as part > of the facility information element in the SETUP message. > I've seen that work has been done to make this happen at > http://bugs.digium.com/view.php?id=4046. What I would like > to know is did this fix make it into 1.2.4? If so, how do I > "Turn-it-on" so that I can use it too? > > Edward > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
