Re: [Asterisk-Users] SS7 signaling/Softswitch

[Steve Underwood]

Interesting. Someone thinks that a strategic use for * should be off 
this list. Someone thought my FAX modem for * should be off this list. 
However, nobody seems to think a 1000 messages about Grandstream phones 
should be off this list.

Personally I would welcome seeing more of what people are doing in the 
softswitch area.

Regards,
Steve
CW_ASN wrote:

Juan:

I think that we must continue with the discussion out of this list.

"Te contacto por fuera de la lista."

Regards,

Gus

----- Original Message -----
From: "Juan J. Sierralta P." <[EMAIL PROTECTED]>
To: "Asterisk Users" <[EMAIL PROTECTED]>
Sent: Friday, October 24, 2003 7:50 PM
Subject: Re: [Asterisk-Users] SS7 signaling/Softswitch
 

On Fri, 2003-10-24 at 16:29, CW_ASN - Gus wrote:

   

No, its not 100% accured. * can be used as Softswitch in MGCP... all
     

"good"
 

softswitchs uses MGCP/TGCP/NCS to manage each endpoint. I have 1 * box
     

under
 

test with Cisco BTS10200, and * works very fine with this softswitch.
     

You
 

could use SIP too...
     

Can you explain that setup a bit more ?
You mean that BTS is controling the * box using MGCP or the inverse ?
Cause a I have an * box using a BTS+AS5300 as its PTSN gateway using
SIP. But the BTS receives the SS7 signaling(via an ITS i think) and
controls the AS5300 via MGCP. Then the * box it is another SIP route
inside the BTS.
--
Juanjo sin .sig
   



_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users