The Dial line that I am using, which is called from within a Macro;
exten => s,n(dialextension),Dial(SIP/${ARG1:-3},15,tT)
Where ARG1 is a 3-digit extension number.
On 10/04/2006, at 9:24 PM, Eric ManxPower Wieling wrote:
Peter J Dean wrote:
I have an issue with trying to ensure that when dialling an
extension that it continues to ring up to the timeout value. But
what I am finding is that the timeout is all over the place.
Sometimes half the timeout value and other times within a few
seconds of the timeout value.
I am running with the following software versions on a Dell PE2550
dual-processor server that is not under load;
Red Hat FC4 Kernel 2.6.15-1.1830_FC4smp
Asterisk Version 1.2.6
Zaptel Version 1.2.5
Libpri Version 1.2.2
Addons Version 1.2.2
Sounds Version 1.2.1
How do I ensure that the dial command timeout is somewhat more
accurate.
I have not experienced this exact problem. Paste a copy of your
Dial line. I have experienced something similar -- I was dialing
out of an analog FXO port. Asterisk considers the call "answered"
as soon as it's finished dialing out of an ANALOG FXO port.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
