Steve Kennedy wrote:
Is there a way to differentiate between a SIP address which hasn't
registered (but is within sip.conf) and one that's not there at all
(i.e. not in sip.conf) using a straight dialplan.
I'd like to differentiate actions depending the state of a SIP device
and whether it's in my config or not (if that makes sense, basic automap
of dial-in lines to sip phones, but if they've turned it off, different
error from a line not mapped to a phone).
Asterisk-1.2.6 ...
Steve
Might do the trick for you:
-= Info about application 'ChanIsAvail' =-
[Synopsis]
Check channel availability
[Description]
ChanIsAvail(Technology/resource[&Technology2/resource2...][|options]):
This application will check to see if any of the specified channels are
available. The following variables will be set by this application:
${AVAILCHAN} - the name of the available channel, if one exists
${AVAILORIGCHAN} - the canonical channel name that was used to create
the channel
${AVAILSTATUS} - the status code for the available channel
Options:
s - Consider the channel unavailable if the channel is in use at all
j - Support jumping to priority n+101 if no channel is available
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
