Phillip, exten => _9NXXXXX,1,StripMSD,1 Exten => _NXXXXX,1,Dial(SIP/[EMAIL PROTECTED]) Exten => _NXXXXX,2,Congestion
Should work Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Phillip Jackson Sent: 26 October 2003 23:35 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Extensions Problem Hello again, Here's the next big issue, I thought I'd let you munch on. We are utilizing Cisco 7960's and the following entries in our extensions.conf file: Exten => 1637,1,Dial(SIP/100) Exten => _NXXXXXXXXX,1,Dial(SIP/[EMAIL PROTECTED]) Exten => _NXXXXXXXXX,2,Congestion Exten => _1NXXXXXXXXX,1,Dial(SIP/[EMAIL PROTECTED]) Exten => _1NXXXXXXXXX,2,Congestion These extensions allow us to utilize our SIP provider - ONLY when being dialed from a regular telephone attached to a Cisco ATA-186. Our Cisco 7960 only allows us to dial 4 charachters before it tries dialing. So, I assume we need to implement 9, and the number. However, when I do this, the 9 gets passed on to our SIP provider, which tries to dial 9NXXXXXXXXXX, and all goes to hell. Question - is there a way to allow 9 in the dialing plan, without having it be passed to the sip provider. Regards, Phillip -- Phillip C. Jackson [EMAIL PROTECTED] ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
