Hmm not so sure of that. I have an HP all-in-one thingy. It is not possible
to set the TX/RX speed hard in the config at a certain speed. Through the
developers menu in the beast it is possible to do this temporary.
Faxing at max 9600 bps works, anything higher fails miserably after the
second or third page.....
This doesn't make sense. The known problems are all timing related, and 9600
(I presume you mean V.29 at 9600) is no more or less sensitive to timing
slips than V.17. Actually, on a poor line V.17 at 9600bps should perform
considerably better than V.29 at 9600bps. Can you tell me your exact setup?
There must be something else wrong.
I tried lots of different settings but none really seemed to help.
The line is ISDN BRI with an HFC-S card. Software is bristuff with florz
patch. Echo can, silence suppr. etc all disabled.
The HP is connected to a Sipura SPA 2000 with the correct settings for fax
and the region i'm in. Still consistently faxes fail after the first or
second page. The HP is a LaserJet 3330 mfp.
Setting it back 9600 did help a bit.
I solved the problem now by connecting an old Digital -> Analog converter
to the BRI line, bypassing Asterisk.
Thanks!
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
