What happens if you remove the "r" option? "r" is almost NEVER useful.
Steve Feinstein wrote:
I've been pulling my hair out over this one trying to understand it.
If you have a very simple extension:
exten => 1,n,Dial(IAX2/Steve|24|r)
Everything I've seen says this should tell the IAX phone (our own
iaxclient based one) to make a ringing sound, or asterisk should make
the ringback indication itself if it determines that the channel can't
do it for itself.
But you can dial this extension all day and you never hear a ringback
indication. Dial it from a SIP softphone and you do. If you change the
default country in the indications.conf, the SIP phone will change the
way the ring sounds. IAX, still nothing.
You can use PlayTones(ring) in the dialplan before the Dial(), and it
seems to behave ok. Playing the appropriate ring indication until the
call is answered. But it seems like the behavior is inconsistent with
IAX vs. SIP. Is this by design?
All the IAX soft phones I've tried are based on the same iaxclient libs,
so it's hard to know if it's the phone or asterisk that's not behaving
right. Has anyone used an iax hard phone, some other IAX
device/software, and does it exhibit the same behavior? Or is this a
problem with the iax code not being telling asterisk that IAX phones
need to have their indications faked.
Any ideas about what's going on would be most gratefully appreciated.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
