Carlos,
Make sure you are using the telco clock in your zaptel.conf, and use
"faxdetect=both" in your unicall.conf.
I had several issues before finding a combination of
asterisk+libspandsp+libunicall that worked for me.
Currently they are:
- spandsp-20060205.tar.gz
- libmfcr2-20060205.tar.gz
- asterisk-1.2.4.tar.gz
Saludos,
--
Paulo
Carlos Chavez escreveu:
On Fri, 14 Apr 2006 23:48:31 -0300, Paulo Scardine wrote
I use Unicall and app_rxfax to receive (works very well) and
iaxmodem+hylafax for sending (took a little longer than I would
expect, like 50%).
Just use a recent iaxmodem (make it "static"). I use a libspandsp snapshot.
Did you do anything special in the configuration? I hae tried several
things but I simply cannot send or receive a fax when using Unicall. Faxes on
the same machine using a couple of FXO channels on a TDM400P card work most of
the time although they usually cause the sending machine to print an error on
the transmission.
--
Carlos Chavez
Director de Tecnología
Telecomunicaciones Abiertas de México S.A. de C.V.
Tel: +52-55-91169161 Ext 2001
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
