Doug Lytle wrote:
Nicholas Kathmann wrote:
------------------------------------------------------------------------
Both hylafax and * are on the same machine and using the same PSTN
interfaces (whether T1 or TDM). It uses iaxmodem to communicate
between the two systems (imagine a softmodem). I'll create separate
extensions for the iaxmodems, then either map the numbers (or
channels off the TDM cards) to dial those extensions. You can also
use the fax extension on your default incoming to dial the iaxmodem.
Faxgetty then listens to the iaxmodem to receive faxes, and uses
hylafax to send them to the appropriate email addresses, printers,
etc. In most cases I'll set up separate PSTN numbers for incoming
faxes, but the fax extension also works relatively well. The only
time I've ever seen problems with faxes (or modems) is when trying to
use a SIP or IAX provider over the internet. To connect the analog
fax machines I'll either use a linksys PAP2
I've found the same success here as well. TE110P, Asterisk. iaxmodem
and HylaFAX. 332 pages in the last month with 1 failure. Had to
tweak the rxgains a little, but afterwards, it just works. Thanks Lee
and Steve!
If you need to tweak gains something is seriously wrong.
Steve
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
