|
Ok. First of all , be
sure Redfone ethernet link and the Asterisk ethernet link are both on the same
switch segment. Then try an “pri
intense debug” on asterisk console. I believe (not sure), this link is
not at IP level but ethernet level 2 It can help to
determine if packets get stucked into the redphone or it is an issue related to
Asterisk. Hope it helps Ing. Oscar Andrés Carriles Presidente InFoDaX Consultants Nicolás Jorge 994 (B1706AVA) Haedo Buenos Aires, Argentina Tel: 54 11 4650 1775 Fax: 54 11 4650 4295 -----Mensaje
original----- We have a crossover from telco to the CSU
and a crossover from the CSU to the RedFone and then a regular Ethernet cable
from the RedFone to the Asterisk. From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Oscar Carriles I believe it is important to determine if
the issue arrives at TDMoE level (RedPhone uses it to avoid a direct T1 link
with the box ) Or at PRI level. I am not clear what kink
of link bridges your redPhone to Asterisk. Is it an ethernet link or a T1
crossover? Ing.
Oscar Andrés Carriles Presidente InFoDaX
Consultants Nicolás
Jorge 994 (B1706AVA) Haedo Buenos
Aires, Argentina Tel: 54 11 4650 1775 Fax: 54
11 4650 4295 -----Mensaje
original----- Ok here is our setup. We are using Asterisk 1.2.6 and Zaptel 1.2.5. We
are using RedFone’s FoneBridge’s. We also have a Nortel Option 11C
that we have hooked up to the Asterisk. We have 3 T1’s from MCI into one FoneBridge on ports 1 to 3 using
d4 and ami signaling. Then we have a local Qwest T1 on port 4 using esf and
b8zs. All four are configured with em_w. We are, at this point, only using
Asterisk as an IVR with plans to move off the Nortel in the future if we can
make this work. We have a second FoneBridge with four PRI’s connected to
our Nortel 11C using esf and b8zs and pri_net. The telco T1’s do not have
D-Channels but the Nortel do. Calls come into the first FoneBridge and into
Asterisk. They are played a message about call recording and then the call is
transferred to the Nortel system to be processed by an agent. When we first fire this up all seems to work just fine, calls come in,
get the message and then transfer to the Nortel and on to an agent. Everybody
is happy. The problem is after 5-20 minutes calls on the MCI lines start getting
busy signals. The Qwest line NEVER stops working. We would place a few test
calls on the MCI and get busy signals and then they start going through again.
A few minutes later they get busy signals again. When we get the busy signals there is no response on the Asterisk CLI
with verbose at 10. It’s as if the Asterisk is not ever seeing the call. What is annoying is that it works fine for a bit and then starts
hiccupping. Can anyone shed any light on where to look? Any help would be
desperately appreciated. Please help. _____________________
Kevin Savoy Business Unit Telecom
Analyst 2218 4th Ave W Williston, ND 58801 Ph: 701-774-4023 Fax: 701-774-2901 Novo 1 is a service mark of Novo 1, Inc --
--
--
--
|
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
