On 4/17/06, Joseph Rothstein <[EMAIL PROTECTED]> wrote:
I'm using the PRI to Ethernet bridge from Cisco. It's call a 2800 router with a T1 card.
Of course, if my router dies, I'm SOL. I could have two routers and balance calls across them. Of course, any active calls to the dead router would be lost, but it's pretty cheap, all considering it uses SIP.
Is anyone using a PRI to Ethernet bridge, or any other kind of E1 GW that
would allow failover to an alternate Asterisk box without manually switching
the cable? This one is a litte
expensive( http://www.mapleleaf-technologies.com/webstore/ethernetbridges.php
), but seems like it would do the trick. But I would have to run TDMoE
between the Asterisk boxes and the bridge. Not a big deal probably, but I
have no experience with TDMoE
I'm using the PRI to Ethernet bridge from Cisco. It's call a 2800 router with a T1 card.
Of course, if my router dies, I'm SOL. I could have two routers and balance calls across them. Of course, any active calls to the dead router would be lost, but it's pretty cheap, all considering it uses SIP.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
