Perpahs you need a Wait(2) before Answer() in the dialplan, because telco send CallerIDName after some time (second ring, I suppose).
Mimmus > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Jonathan k. Creasy > Sent: Wednesday, April 19, 2006 3:28 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] PRI caller ID > > I searched through the archives and the wiki...don't be so > pissy...i missed it I guess, my bad.... > > -Jonathan > > > -----Original Message----- > > From: [EMAIL PROTECTED] > [mailto:asterisk-users- > > [EMAIL PROTECTED] On Behalf Of Jerry Jones > > Sent: Wednesday, April 19, 2006 9:17 AM > > To: Asterisk Users Mailing List - Non-Commercial Discussion > > Subject: Re: [Asterisk-Users] PRI caller ID > > > > Pleaase read the archives or the wiki - you will shortly > find you need > > a wait in your dialplan > > > > > > On Apr 19, 2006, at 8:10 AM, Jonathan k. Creasy wrote: > > > > > Below is a snipped debug on our PRI. We are getting > number only for > > > the CallerID but the telco says they are sending us Name > and Number. > > > We are getting the Name in a second frame but Asterisk is not > > > passing it to the device it rings. The message below says > > > "Presenation allowed of network provided number" which > leads me to > > > believe Asterisk thinks it should not be displaying it. > Can anyone > > > interpret this for me and maybe shed some light on why I am not > > > getting the caller ID name displayed? I have asreceived in my > > > Zapata.conf file. > > > > > > > > > > > > > > > > > > < Facility (len=23, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, > 0xa1, 0x0f, > > > 0x02, 0x01, 0x01, 0x06, 0x07, 0x2a, 0x86, 'H', 0xce, 0x15, 0x00, > > > 0x04, 0x0a, 0x01, 0x00 ] > > > > > > < [6c 0c 21 83 35 30 32 38 38 39 35 35 36 37] > > > > > > < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: > > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > > > > > > < Presentation: Presentation allowed of > > > network provided number (3) '5028895567' ] > > > > > > < [70 08 c1 33 31 35 30 35 36 36] > > > > > > < Called Number (len=10) [ Ext: 1 TON: Subscriber Number > (4) NPI: > > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3150566' ] > > > > > > Handle Q.932 ROSE Invoke component > > > > > > Don't know what to do if second ROSE component is of type 0x6 > > > > > > Sending Receiver Ready (84) > > > > > > > > > > > > < Message type: FACILITY (98) > > > > > > < [1c 1d 9f 8b 01 00 a1 17 02 01 01 02 01 00 80 0f 43 65 > 6c 6c 20 50 > > > 68 6f 6e 65 20 20 20 4b 59] > > > > > > < Facility (len=31, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, > 0xa1, 0x17, > > > 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0f, 'Cell', 0x20, > > > 'Phone', 0x20, 0x20, 0x20, 'KY' ] > > > > > > > > > > > > -Jonathan > > > > > > > > > > > > Jonathan Creasy > > > Network Engineer > > > > > > BluegrassNet Development > > > > > > www.bgnd.com www.bluegrass.net > > > > > > o. 502-589-4638 > > > > > > c. 502-889-5567 > > > > > > h. 502-541-0566 > > > > > > > > > > > > _______________________________________________ > > > --Bandwidth and Colocation provided by Easynews.com -- > > > > > > Asterisk-Users mailing list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
