Greetings,
I'm using asterisk to connect our three locations together with a sort
of inter-company auto attendant connected like this:
PBX (fxs) <-> Sipura 3k (fxo) <-> Asterisk <-IAX-> remote asterisk
It works like this: Person picks up their phone and dials a number to
get to the auto attendant (I don't have any FXO ports available on our
PBX to do it the "right" way). The attendant answers and asks them the
remote extension they want to dial. This setup has worked very well for
several months. Last week I upgraded to 1.2.7.1 from 1.2.4 (I think).
Since then I've been having trouble with the auto-attendant correctly
detecting DTMF (missing digits). Some times it works flawlessly, others
I have to try over and over before it is detected correctly. It isn't
even consistently dropping the same digit from what I can see on the
console. The only thing I've found is that I have a better chance of it
working if I wait for the prompt to finish before dialing. I have
changed the DTMF method from rfc2833 to info and finally inband with
only a little change (inband seems to work the best).
Has anyone else run into similar problems or have any more suggestions
to try?
This is the attendant portion of my extensions.conf:
[inter-attendant]
exten => s,1,Answer
exten => s,2,Wait(1)
exten => s,3,Set(TIMEOUT(response)=10)
exten => s,4,Background(enter-ext-of-person)
exten => i,1,Playback(invalid)
exten => i,2,Goto(s,4)
exten => i,3,Hangup
exten => t,1,Playback(goodbye)
exten => t,2,Hangup
include => tests
include => fullertonpbx
include => intercompany
Thank you for any insight you can provide.
Dave Fullerton
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
