I have asterisk with an old avm b1 v3.0 configured and working with capi channel . The isdn card is connected to an S0 isdn bus of a siemens hipath 3000 version 4.0 It is possible to make outgoing calls and receive too, but I think that there is some kind of signaling problem when i call from an ip phone or soft ip phone because i do not get ring or busy tone calling to any PBX phone, but if i get outside line (i.e. calling a cell phone at PSTN) then i can hear the busy or ring tones.
So, if i call to any pbx phone i do not hear anything until someone picks up the phone and if it is busy i do not know and after a while i get the normal call clearing and the call is finished.
IP PHONE -----> B1 (ISDN) chan capi AT * ----------> S0 BUS HIPATH ---------> PSTN
Does anybody know any useful trick to solve this?
I know that may be it is a signaling problem and isdn related question, but if someone can help me it would be great.
Pardon my bad English and thanks.
Some configured parameters:
****************************************************************************
;
;capi.conf
;
; general section
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
language=es
; interface sections ...
[ISDN1]
;ntmode=yes
isdnmode=msn
incomingmsn=620
controller=1
group=1 ;dialout group
;prefix=0
softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards
accountcode= ;Asterisk accountcode to use in CDRs
context=capi-in ;context for incoming calls
holdtype=hold ;
;immediate=yes
;echosquelch=1
;echocancel=yes
;echotail=64
bridge=yes
callgroup=1
language=es
***********************************************************************
;
;indications.conf
;
[general]
country=es
[es]
description = Spain
ringcadence =1500,3000
dial = 423
busy =425/200,0/200
congestion = 425/200,0/200,425/200,0/200,425/200,0/600
callwaiting = 425/175,0/175,425/175,0/3500
dialrecall = !425/200,!0/200,!425/200,!0/200,!425/200,!0/200,425
record = 1400/500,0/15000
info = 950/330,0/1000
dialout = 500
*********************************************************************
;
; part of dial extensions.conf for dialing outisde
;RDSI=620 is the number for the isdn S0 bus
;
[capi-out]
exten => _0.,1,NoOp("Salida a la calle" ${CALLERID})
exten => _0.,2,Dial(CAPI/g1/${RDSI},20)
...
**********************************************************************
Thanks.
Ricardo
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
