Inserting a "w" did resolve the problem. I saw another post from today where somebody else is having the same problem with a TDM2400P. Hopefully someday Asterisk will be coded to wait for a dial tone.
nb
On 4/19/06, Time Bandit <[EMAIL PROTECTED]> wrote:
> When dialing an outbound number, sometimes all the digits are not dialed
> properly on the outside line. In the dial plan I added a SayDigits to the
> outbound rule and it properly reads back the entire number that was entered
> on the phone before dialing.
>
> Is asterisk dialing too quickly, is there anyway to insert a pause or wait
> for a dial tone on the external line?
* is probably starting to dial too fast. Try to add a w in your dial
string to make it wait.
Like : Dial(ZAP/g0,w${EXTEN})
w adds half a second pause. You can put more w to make it wait longer.
hth
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
